Metal Roofing
Brooklyn, NY
Metal roofing is the longest-lasting, lowest-maintenance roofing system available. We install standing seam, corrugated, and metal shingle systems on Brooklyn homes — built to handle NYC winters, coastal salt air, and decades of use.
- Standing seam, corrugated & metal shingle specialists
- Steel, aluminum & Galvalume panel systems
- 40–70 year lifespan — longest of any roofing material
- NYC licensed, bonded & insured
Which Metal Roofing System Fits Your Brooklyn Home?
Not all metal roofing is the same. The system you choose affects cost, longevity, appearance, and maintenance requirements. We install all three major residential metal systems — here's how they compare.
Best for: Sloped residential roofs, modern aesthetic, maximum longevity
Standing seam is the gold standard of metal roofing. Panels connect at raised vertical seams — all fasteners are hidden beneath the surface, eliminating the #1 failure point of exposed-fastener systems. The result is a watertight, virtually maintenance-free roof that expands and contracts with temperature changes without loosening fasteners.
- Concealed fasteners — no exposed screws to back out or leak
- Floating clip system allows thermal movement without stress
- Strongest wind uplift resistance of any panel system
- Available in steel, aluminum, and Galvalume substrates
- 40+ color options with PVDF fluoropolymer finish coatings
Best for: Outbuildings, porches, budget-conscious full replacements
Corrugated and R-Panel metal roofing use exposed fasteners with rubber-gasketed screws that seal each penetration. Properly installed and maintained they perform reliably for decades at a significantly lower cost than standing seam. The exposed fasteners require periodic inspection — gaskets can harden over 15–20 years and should be replaced.
- Lowest installed cost of metal roofing systems
- Fast installation — ideal for large or simple roof planes
- Widely available in 26- and 29-gauge steel
- Classic corrugated or flat rib profiles available
- Re-fastener maintenance every 15–20 years extends life
Best for: Homes where traditional shingle/slate aesthetics are important
Metal shingles are stamped steel or aluminum panels designed to mimic the appearance of asphalt shingles, wood shake, clay tile, or slate — with all the durability advantages of metal. They're a strong choice for Brooklyn's brownstone-adjacent neighborhoods where a conventional appearance matters but homeowners want the longevity of metal.
- Mimics asphalt shingle, wood shake, or slate appearance
- Steel or aluminum substrates available
- Interlocking panels provide superior wind resistance
- Class 4 impact resistance available on select products
- Ideal for traditional Brooklyn rowhouse neighborhoods
Material choices: We install Galvalume steel (most common), G-90 galvanized steel, and aluminum panels — each with trade-offs in cost, corrosion resistance, and weight. We'll recommend the right substrate for your home's location and budget.
Why Brooklyn Homeowners Are Choosing Metal Roofing
Metal roofing has moved from commercial and agricultural applications into mainstream residential roofing — and for good reason. Here's what makes it the right choice for many Brooklyn homes.
Class A Fire Rating
Metal is non-combustible — the highest fire resistance classification available for roofing materials. Relevant for Brooklyn rowhouses where homes share walls and embers from neighboring fires can land on roofs.
Superior Wind Resistance
Standing seam metal panels are engineered to withstand 110–160 mph winds — far beyond what asphalt shingles handle. No individual pieces to blow off, no nailed-down tabs to lift. Critical for Brooklyn's nor'easter exposure.
Snow & Ice Performance
Metal's smooth surface sheds snow and ice more effectively than any other material. Properly installed with snow guards, metal roofs eliminate the ice dam problem that plagues Brooklyn homes with asphalt shingles every winter.
Sustainable & Recyclable
Metal roofing is 25–95% recycled content and is 100% recyclable at end of life — unlike asphalt shingles that go to landfill. It also reflects solar radiation, reducing cooling loads in Brooklyn's hot summers.
Noise Misconception Addressed
Properly installed metal roofing with solid sheathing beneath is no louder than shingles — the 'rain on a tin roof' effect only occurs on metal installed over open purlins without solid decking. We always use proper underlayment.
Long-Term Cost Advantage
Metal's higher upfront cost is offset by a 40–70 year lifespan with minimal maintenance. Most Brooklyn homeowners will replace asphalt shingles 2–3 times in the same period. Metal is often the better financial decision over a 30-year horizon.
Standing seam metal panel installation
Galvalume steel with concealed clip system
Metal Roofing & Insurance Premiums
Many homeowner insurance providers offer premium discounts for metal roofing due to its Class A fire rating and superior wind resistance. Ask your insurer — savings of 5–25% are not uncommon and can meaningfully offset the higher upfront cost over a 30-year mortgage.
Metal Roofing Services in Brooklyn
Whether you're installing a new metal roof, repairing an aging one, or extending its life through coating — we handle every aspect of metal roofing for Brooklyn homes and commercial properties.
Full Metal Roof Installation
Complete tear-off and new metal roof installation — from existing surface removal and deck inspection through underlayment, panel installation, flashing fabrication, and ridge cap. We custom-measure and cut panels on-site for precise fits around all penetrations and roof geometry.
- Full tear-off & debris disposal
- Deck inspection & repair
- High-temp underlayment installation
- Panel fabrication & installation
- Custom-bent flashing at all edges & penetrations
- Ridge cap, hip, and valley details
Metal Roof Repair
Repairs to existing metal roofing including seam re-sealing, panel replacement, fastener replacement (exposed-fastener systems), flashing repair at chimneys and penetrations, and rust treatment or coating on aged steel roofs.
- Seam sealant repair & re-seaming
- Damaged panel replacement
- Fastener inspection & replacement
- Rust treatment & encapsulation
- Flashing repair & re-flashing
- Pitch pocket & penetration sealing
Metal Roof Inspection
Detailed written assessment of your metal roof's condition — covering panel condition, fastener backing (exposed-fastener systems), seam integrity (standing seam), rust or corrosion assessment, flashing condition, and coating integrity.
- Full panel & seam inspection
- Fastener condition assessment
- Rust & corrosion mapping
- Coating integrity check
- Flashing evaluation
- Written report with photos
Metal-Over-Metal Retrofit
Under the right conditions, a new standing seam metal roof can be installed directly over an existing metal roof using a furring strip system — adding insulation value and eliminating tear-off costs while achieving a concealed-fastener result.
- Existing panel condition assessment
- Furring strip system design & install
- New standing seam panel installation
- All new trim & flashing
- Thermal and acoustic improvement
Metal Roof Coating & Restoration
Aged metal roofs showing minor rust, faded coating, or small seam failures can often be restored with elastomeric or silicone coating systems — significantly extending life without full replacement. A fraction of the cost when conditions allow.
- Rust treatment & prime coat
- Seam reinforcement with fabric
- Full elastomeric or silicone topcoat
- 15–20 year extended service life
- Reflective coating options available
Snow Guard Installation
Metal's smooth surface sheds snow rapidly — which can be a safety hazard at entries and walkways. We design and install snow guard systems calibrated to your roof's pitch, panel profile, and snow load to control where and how snow releases.
- Snow load calculation
- Guard spacing layout design
- Adhesive or clamp-on installation
- Compatible with all panel profiles
- Pad and bar guard styles available
The Metal Roof Installation Process
Metal roofing requires more precision and planning than asphalt shingles. Here's exactly how we approach every project — from first call to warranty documentation.
Free Consultation
Call or submit a request online. We schedule a free site visit within 1–3 business days. Metal roofing is a significant investment — we take time to understand your goals, timeline, and budget before making any recommendations.
Roof Assessment
We inspect your current roof structure, deck condition, pitch, existing penetrations, and drainage. Metal roofing has specific structural and slope requirements — we verify your home is a good candidate and identify any deck repairs needed before installation.
System Recommendation & Written Proposal
You receive a written proposal within 24 hours covering: recommended system (standing seam, corrugated, or metal shingles), material specifications, substrate gauge, color and coating options, scope of work, and firm pricing. Everything in writing.
Detailed Field Measurement
Before materials are ordered, we perform a detailed field measurement of every roof plane, hip, ridge, valley, and penetration. Metal panels are often roll-formed or cut to exact length — precise measurements prevent waste and ensure clean panel runs.
Installation
Existing roofing is removed, deck is inspected and repaired, high-temp underlayment is installed, then panels are installed from eave to ridge. All trim, flashing, and ridge caps are custom-bent on site. Most Brooklyn residential installs complete in 2–4 days.
Final Inspection & Warranty
We walk the entire roof with you, review all panel seams, flashing points, and penetrations. Property is cleaned, gutters cleared of metal scraps. You receive manufacturer warranty documentation and our 10-year workmanship warranty in writing.
How Much Does Metal Roofing Cost in Brooklyn?
Metal roofing costs more upfront than asphalt shingles but significantly less over a 40–70 year horizon. Here's a realistic breakdown of what to expect in the Brooklyn market in 2024.
| Scope | Low | High |
|---|---|---|
| Metal Roof Repair (minor) | $400 | $1,500 |
| Metal Roof Repair (major) | $1,500 | $5,000 |
| Metal Roof Coating / Restoration | $5,000 | $14,000 |
| Corrugated / R-Panel — Full Install | $12,000 | $24,000 |
| Metal Shingles — Full Install | $18,000 | $35,000 |
| Standing Seam — Full Install | $24,000 | $55,000+ |
Factors That Drive Metal Roof Cost
The 30-Year Cost Comparison
A $14,000 architectural shingle roof replaced twice over 30 years costs $28,000–$35,000+ in today's dollars. A $28,000 standing seam metal roof needs no replacement in that window and minimal maintenance. The breakeven point for metal is typically 15–20 years — after which you're ahead financially.
Insurance Premium Savings
Metal roofing's Class A fire rating and superior wind resistance qualify many homeowners for insurance premium discounts of 5–25%. Check with your insurer before your installation — some require documentation of the specific material and installation method.
Financing Available
We offer financing options for qualified homeowners. Given metal roofing's longevity advantage, many homeowners find the financing math works strongly in their favor compared to repeated shingle replacements.
Metal Roofing Questions Brooklyn Homeowners Ask
Straight answers to the most common metal roofing questions — no marketing fluff.
Call: (718) 555-0190Ready to Invest in a
Metal Roof That Lasts?
Metal roofing is the last roof you'll ever need to install. We'll assess your home, recommend the right system, and give you a written proposal — so you can make an informed decision with no pressure.